Local Environments Created by the Ligand Coating of Nanoparticles and Their Implications for Sensing and Surface Reactions.

ConspectusThe ligand shells of colloidal nanoparticles (NPs) can serve different purposes. In general, they provide colloidal stability by introducing steric repulsion between NPs. In the context of biological applications, the ligand shell plays a critical role in targeting, enabling NPs to achieve specific biodistributions. However, there is also another important feature of the ligand shell of NPs, namely, the creation of a local environment differing from the bulk of the solvent in which the NPs are dispersed. It is known that charged ligand shells can attract or repel ions and change the effective charge of a NP through Debye-Hückel screening. Positively charged ions, such as H+ (or H3O+) are attracted to negatively charged surfaces, whereas negatively charged ions, such as Cl- are repelled. The distribution of the ions around charged NP surfaces is a radial function of distance from the center of the NP, which is governed by a balance of electrostatic forces and entropy of ions and ligands. As a result, the ion concentration at the NP surface is different from its bulk equilibrium concentration, i.e., the charged ligand shell around the NPs has formed a distinct local environment. This not only applies to charged ligand shells but also follows a more general principle of induced condensation and depletion. Polar/apolar ligand shells, for example, result in a locally increased concentration of polar/apolar molecules. Similar effects can be seen for biocatalysts like enzymes immobilized in nanoporous host structures, which provide a special environment due to their surface chemistry and geometrical nanoconfinement. The formation of a local environment close to the ligand shell of NPs has profound implications for NP sensing applications. As a result, analyte concentrations close to the ligand shell, which are the ones that are measured, may be very different from the analyte concentrations in bulk. Based on previous work describing this effect, it will be discussed herein how such local environments, created by the choice of used ligands, may allow for tailoring the NPs' sensing properties. In general, the ligand shell around NPs can be attractive/repulsive for molecules with distinct properties and thus forms an environment that can modulate the specific response. Such local environments can also be optimized to modulate chemical reactions close to the NP surface (for example, by size filtering within pores) or to attract specific low abundance proteins. The importance hereby is that this is based on interaction with low selectivity between the ligands and the target molecules.

Dissecting common and divergent molecular pathways elicited by CdSe/ZnS quantum dots in freshwater and marine sentinel invertebrates.

Water ecosystems represent main targets of unintentional contamination of nanomaterials, due to industrial waste or other anthropogenic activities. Nanoparticle insult to living organisms may occur in a sequential way, first by chemical interactions of the material with the target membrane, then by progressive internalisation and interaction with cellular structures and organelles. These events trigger a signal transduction, through which cells modulate molecular pathway in order to respond and survive to the external elicitation. Therefore, the analysis of the global changes of the molecular machinery, possibly induced in an organism upon exposure to a given nanomaterial, may provide unique clues for proper and exhaustive risk assessment. Here, we tested the impact of core/shell CdSe/ZnS QDs coated by a positively charged polymer on two aquatic species, the polyp Hydra vulgaris and the coral S. pistillata, representative of freshwater and sea habitats, respectively. By using reliable approaches based on animal behaviour and physiology together with a whole transcriptomic profiling, we determined several toxicity endpoints. Despite the difference in the efficiency of uptake, both species were severely affected by QD treatment, resulting in dramatic morphological damages and tissue bleaching. Global transcriptional changes were also detected in both organisms, but presenting different temporal dynamics, suggesting both common and divergent functional responses in the two sentinel organisms. Due to the striking conservation of structure and genomic organisation among animals throughout evolution, our expression profiling offers new clues to identify novel molecular markers and pathways for comparative transcriptomics of nanotoxicity.

Joining Two Natural Motifs: Catechol-Containing Poly(phosphoester)s.

Numerous catechol-containing polymers, including biodegradable polymers, are currently heavily discussed for modern biomaterials. However, there is no report combining poly(phosphoester)s (PPEs) with catechols. Adhesive PPEs have been prepared via acyclic diene metathesis polymerization. A novel acetal-protected catechol phosphate monomer was homo- and copolymerized with phosphoester comonomers with molecular weights up to 42000 g/mol. Quantitative release of the catechols was achieved by careful hydrolysis of the acetal groups without backbone degradation. Degradation of the PPEs under basic conditions revealed complete and statistical degradation of the phosphotri- to phosphodiesters. In addition, a phosphodiester monomer with an adhesive P-OH group and no protective group chemistry was used to compare the binding to metal oxides with the multicatechol-PPEs. All PPEs can stabilize magnetite particles (NPs) in polar solvents, for example, methanol, due to the binding of the phosphoester groups in the backbone to the particles. ITC measurements reveal that multicatechol PPEs exhibit a higher binding affinity to magnetite NPs compared to PPEs bearing phosphodi- or phosphotriesters as repeating units. In addition, the catechol-containing PPEs were used to generate organo- and hydrogels by oxidative cross-linking, due to cohesive properties of catechol groups. This unique combination of two natural adhesive motives, catechols and phosphates, will allow the design of novel future gels for tissue engineering applications or novel degradable adhesives.

An autonomic self-healing organogel with a photo-mediated modulus.

A new method is described for fabricating autonomic, self-healing, deformable organogels. We combined imidazolium-based poly(ionic liquid) (PIL) and azobenzene-grafted poly(carboxylic acid) (PAA-Azo) in N,N-dimethyl formamide. Further, complexing PIL with unirradiated (trans) or irradiated (cis) PAA-Azo tuned the elastic modulus of the organogel.

Spherical Polyolefin Particles from Olefin Polymerization in the Confined Geometry of Porous Hollow Silica Particles.

Porous hollow silica particles (HSPs) are presented as new templates to control the product morphology in metallocene-catalyzed olefin polymerization. By selectively immobilizing catalysts inside the micrometer-sized porous hollow silica particles, the high hydraulic forces resulting from polymer growth within the confined geometries of the HSPs cause its supporting shell to break up from the inside. As the shape of the support is replicated during olefin polymerization, perfectly spherical product particles with very narrow size distribution can be achieved by using HSPs exhibiting a monomodal size distribution. Furthermore, the size of the obtained product particles can be controlled not only by the polymerization time but also by the size of the support material.

Evaluation of quantum dot cytotoxicity: interpretation of nanoparticle concentrations versus intracellular nanoparticle numbers.

While substantial progress has been achieved in the design of more biocompatible nanoparticles (NP), detailed data are required on the precise interactions of NPs and their environment for more reliable interpretation of toxicity results. Therefore, this study aims to investigate the interaction of two quantum dots (QDs) of the same core material CdSe/ZnS coated with two different amphiphilic polymers, with two well-established mammalian cell lines representing possible sites of QD accumulation. Results are linked to either extracellular QD concentrations (given dose) or cellular QD levels (number of internalized particles). In this study, QD internalization, effects on cellular homeostasis, and consequent inflammatory and cytoskeletal alterations caused by these QDs were explored. Fluorescence imaging techniques, including; image-based flow cytometry, confocal microscopy and high-content imaging with the InCell analyzer were used in a multiparametric methodology to evaluate cell viability, induction of oxidative stress, mitochondrial health, cell cytoskeletal functionality and changes in cellular morphology. Gene expression arrays were also carried out on 168 key genes involved in the cytoskeletal architecture and inflammatory pathway accompanied with the analysis of focal adhesions as key markers for actin-mediated signaling. Our results show distinct differences between the PMA and PTMAEMA-stat-PLMA coated QDs, which could mainly be attributed to differences in their cellular uptake levels. The toxicity profiles of both QD types changed drastically depending on whether effects were expressed in terms of given dose or internalized particles. Both QDs triggered alterations to important but different genes, most remarkably the up-regulation of tumor suppression and necrosis genes and the down regulation of angiogenesis and metastasis genes at sub-cytotoxic concentrations of these QDs.

Polycarbonate and polystyrene nanoplastic particles act as stressors to the innate immune system of fathead minnow (Pimephales promelas).

Water pollution with large-scale and small-scale plastic litter is an area of growing concern. Macro-plastic litter is a well-known threat to aquatic wildlife; however, the effects of micro-sized and nano-sized plastic particles on the health of organisms are not well understood. Small-scale plastic particles can easily be ingested by various aquatic organisms and potentially interfere with their immune system; therefore, the authors used a freshwater fish species as a model organism for nanoplastic exposure. Characterization of polystyrene (41.0 nm) and polycarbonate (158.7 nm) nanoplastic particles (PSNPs and PCNPs, respectively) in plasma was performed, and the effects of PSNPs and PCNPs on the innate immune system of fathead minnow were investigated. In vitro effects of PSNPs and PCNPs on neutrophil function were determined using a battery of neutrophil function assays. Exposure of neutrophils to PSNPs or PCNPs caused significant increases in degranulation of primary granules and neutrophil extracellular trap release compared to a nontreated control, whereas oxidative burst was less affected. The present study outlines the stress response of the cellular component of fish innate immune system to polystyrene and polycarbonate nanoparticles/aggregates and indicates their potential to interfere with disease resistance in fish populations. Environ Toxicol Chem 2016;35:3093-3100. © 2016 SETAC.

Triblock Terpolymers by Simultaneous Tandem Block Polymerization (STBP).

A route of synthesizing triblock terpolymers in a one-pot, "one-step" polymerization approach is presented. The combination of two distinct polymerization techniques through orthogonal catalyst/initiator functionalities attached to a polymeric linker furnishes novel pathways to ABC-terpolymers. Both polymerizations have to be compatible regarding mechanisms, chosen monomers, and solvents. Here, an α,ω-heterobifunctional poly(ethylene glycol) serves as poly-meric catalyst/initiator to obtain triblock terpolymers of poly(norbornene)-b-poly(ethylene glycol)-b-poly(L-lactic acid) PNB-PEG-PLLA via simultaneous ring opening metathesis poly-merization and ring opening polymerization in a fast one-pot polymerization. Structural characterization of the polymers is provided via (1)H-, DOSY-, and (1)H,(1)H-COSY-NMR, while solution and thin film self-assembly are investigated by dynamic light scattering and atomic force microscopy.

Direct observation of drops on slippery lubricant-infused surfaces.

For a liquid droplet to slide down a solid planar surface, the surface usually has to be tilted above a critical angle of approximately 10°. By contrast, droplets of nearly any liquid "slip" on lubricant-infused textured surfaces - so termed slippery surfaces - when tilted by only a few degrees. The mechanism of how the lubricant alters the static and dynamic properties of the drop remains elusive because the drop-lubricant interface is hidden. Here, we image the shape of drops on lubricant-infused surfaces by laser scanning confocal microscopy. The contact angle of the drop-lubricant interface with the substrate exceeds 140°, although macroscopic contour images suggest angles as low as 60°. Confocal microscopy of moving drops reveals fundamentally different processes at the front and rear. Drops recede via discrete depinning events from surface protrusions at a defined receding contact angle, whereas the advancing contact angle is 180°. Drops slide easily, as the apparent contact angles with the substrate are high and the drop-lubricant interfacial tension is typically lower than the drop-air interfacial tension. Slippery surfaces resemble superhydrophobic surfaces with two main differences: drops on a slippery surface are surrounded by a wetting ridge of adjustable height and the air underneath the drop in the case of a superhydrophobic surface is replaced by lubricant in the case of a slippery surface.

Poly(isobutylene) nanoparticles via cationic polymerization in nonaqueous emulsions.

The preparation of poly(isobutylene) (PIB) nanoparticles via cationic emulsion polymerization is presented. As a requirement, an oil-in-perfluoroalkane nonaqueous emulsion is developed, which is inert under the carbocationic polymerization conditions. To stabilize the dichloromethane/hexane droplets in the fluorinated, continuous phase, an amphiphilic block copolymer emulsifier is prepared containing PIB and 1H,1H-perfluoroalkylated poly(pentafluorostyrene) blocks. This system allows for the polymerization of isobutylene with number-average molecular weights (Mn) up to 27,000 g mol(-1). The particle morphologies are characterized via dynamic light scattering and electron microscopy. For Mn > 20,000 g mol(-1), the particles exhibit shape-persistence at room temperature and are ≈100 nm in diameter.

Synthesis and Selective Loading of Polyhydroxyethyl Methacrylate-l-Polysulfone Amphiphilic Polymer Conetworks.

Polyhydroxyethyl methacrylate-linked by-polysulfone amphiphilic polymer conetworks of two types of segments with Tg above room temperature are presented. The conetworks are prepared by free radical copolymerization of methacryloyl-terminated PSU macromers with 2-ethyl methacrylate, followed by removal of the TMS protecting groups by acidic hydrolysis. Phase separation in the nanometer range due to the immiscibility of the two covalently linked segments is observed using transmission electron and scanning force microscopy. The swelling of the conetworks in water and methanol as polar solvents and chloroform as nonpolar solvent are studied gravimetrically and then in a more detailed fashion by solid-state NMR spectroscopy. Selective swelling and also targeted loading of a small organic model compound specifically to one of the two phases are demonstrated.

Effects of chemical structure on the dynamic and static surface tensions of short-chain, multi-arm nonionic fluorosurfactants.

Fluorinated surfactants with short perfluoroalkyl chains (R(F)) as potential substitutes for the environmentally questionable, long R(F) systems are presented. Three types of nonionic hydrophilic-fluorophilic amphiphiles are synthesized and evaluated based on surface activity in equilibrated (static) and non-equilibrated (dynamic) states. Furthermore, several mono- and disaccharide-based fluorosurfactants are also examined as potential non-bioaccumulative alternatives. A correlation between the chemical structure and resulting surface properties is made by comparing R(F) length, number and size, alkyl-spacer, and hydrophilic moieties. Based on dynamic and static surface tension experiments, the effects of surfactant structure are summarized to provide a basis for the future design of fluorosurfactants. We have found that surfactants with more perfluorinated chains tend to have a higher surface tension reduction, but typically result in slower dynamic behaviors. Using the presented structural characteristics, surfactants with R(F)<4 can be prepared with static surface tensions as low as 18.1 mN/m or reduce surface tension within milliseconds.

Proton conductivity in doped aluminum phosphonate sponges.

Proton-conducting networks (NETs) were prepared successfully by the insertion of phosphonated nanochannels into organic-inorganic hybrid materials that contain Al(3+) as the connector and hexakis(p-phosphonatophenyl)benzene (HPB) as the linker. Noncomplexed phosphonic acid groups remain in the framework, which depends on the ratio of both compounds, to yield a proton conductivity in the region of 10(-3) S cm(-1). This conductivity can be further improved and values as high as Nafion, a benchmark proton-exchange membrane for fuel cell applications, can be obtained by filling the network pores with intrinsic proton conductors. As a result of their sponge-like morphology, aluminum phosphonates adsorb conductive small molecules such as phosphonic acids, which results in a very high proton conductivity of approximately 5 × 10(-2) S cm(-1) at 120 °C and 50 % relative humidity (RH). Contrary to Nafion, the doped networks show a remarkably low temperature dependence of proton conductivity from external humidification. This effect indicates a transport mechanism that is different to the water vehicle mechanism. Furthermore, the materials exhibit an activation energy of 40 kJ mol(-1) at 15 % RH that starts to diminish to 10 kJ mol(-1) at 80 % RH, which is even smaller than the corresponding values obtained for Nafion 117.

Tuning polarity of polyphenylene dendrimers by patched surface amphiphilicity--precise control over size, shape, and polarity.

In the ideal case, a precise synthesis yields molecules with a constitutional as well as a conformational perfectness. Such a case of precision is demonstrated by the synthesis of semi-rigid amphiphilic polyphenylene dendrimers (PPDs). Polar sulfonate groups are precisely placed on their periphery in such a manner that patches of polar and non-polar regions are created. Key structural features are the semi-rigid framework and shape-persistent nature of PPDs since the limited flexibility introduces a nano-phase-separated amphiphilic rim of the dendrimer. This results in both attractive and repulsive interactions with a given solvent. Frustrated solvent structures then lead to a remarkable solubility in solvents of different polarity such as toluene, methanol, and water or their mixtures. Water solubility combined with defined surface structuring and variable hydrophobicity of PPDs that resemble the delicate surface textures of proteins are important prerequisites for their biological and medical applications based upon cellular internalization.

Solvent-free synthesis of microparticles on superamphiphobic surfaces.

Polymeric and composite microspheres can be synthesized without solvents or process liquids by using superamphiphobic surfaces. In this method, the repellency of superamphiphobic layers to monomers and polymer melts and the extremely low adhesion to particles are taken advantage of.

A universal scheme to convert aromatic molecular monolayers into functional carbon nanomembranes.

Free-standing nanomembranes with molecular or atomic thickness are currently explored for separation technologies, electronics, and sensing. Their engineering with well-defined structural and functional properties is a challenge for materials research. Here we present a broadly applicable scheme to create mechanically stable carbon nanomembranes (CNMs) with a thickness of ~0.5 to ~3 nm. Monolayers of polyaromatic molecules (oligophenyls, hexaphenylbenzene, and polycyclic aromatic hydrocarbons) were assembled and exposed to electrons that cross-link them into CNMs; subsequent pyrolysis converts the CNMs into graphene sheets. In this transformation the thickness, porosity, and surface functionality of the nanomembranes are determined by the monolayers, and structural and functional features are passed on from the molecules through their monolayers to the CNMs and finally on to the graphene. Our procedure is scalable to large areas and allows the engineering of ultrathin nanomembranes by controlling the composition and structure of precursor molecules and their monolayers.

Biocompatible polylactide-block-polypeptide-block-polylactide nanocarrier.

Polypeptides are successfully incorporated into poly(l-lactide) (PLLA) chains in a ring-opening polymerization (ROP) of l-lactide by using them as initiators. The resulting ABA triblock copolymers possess molecular weights up to 11000 g·mol(-1) and polydispersities as low as 1.13, indicating the living character of the polymerization process. In a nonaqueous emulsion, peptide-initiated polymerization of l-lactide leads to well-defined nanoparticles, consisting of PLLA-block-peptide-block-PLLA copolymer. These nanoparticles are easily loaded by dye-encapsulation and transferred into aqueous media without aggregation (average diameter of 100 nm) or significant dye leakage. Finally, internalization of PLLA-block-peptide-block-PLLA nanoparticles by HeLa cells is demonstrated by a combination of coherent anti-Stokes Raman spectroscopy (CARS) and fluorescence microscopy. This demonstrates the promise of their utilization as cargo delivery vehicles.

Polymer-coated nanoparticles interacting with proteins and cells: focusing on the sign of the net charge.

To study charge-dependent interactions of nanoparticles (NPs) with biological media and NP uptake by cells, colloidal gold nanoparticles were modified with amphiphilic polymers to obtain NPs with identical physical properties except for the sign of the charge (negative/positive). This strategy enabled us to solely assess the influence of charge on the interactions of the NPs with proteins and cells, without interference by other effects such as different size and colloidal stability. Our study shows that the number of adsorbed human serum albumin molecules per NP was not influenced by their surface charge. Positively charged NPs were incorporated by cells to a larger extent than negatively charged ones, both in serum-free and serum-containing media. Consequently, with and without protein corona (i.e., in serum-free medium) present, NP internalization depends on the sign of charge. The uptake rate of NPs by cells was higher for positively than for negatively charged NPs. Furthermore, cytotoxicity assays revealed a higher cytotoxicity for positively charged NPs, associated with their enhanced uptake.

Synthesis, electrochemical properties and self-assembly of a proton-conducting core-shell macromolecule.

Let the protons flow: The synthesis of a core-shell macromolecule bearing phosphonic acids is presented. The rigid central core serves as a scaffold to stabilize the flexible polymer shells. Pronounced proton conductivity is obtained under humidified conditions. The self-assembly of such dendritic macromolecules by electrostatic interactions on a modified gold substrate is investigated and characterized.